How Do I Change A Battery In A Samsung Tab S2

Working on a device that is turned on may yield an electric shock. Make sure your device is turned off before working on it.

Working on a device that is turned on may yield an electrical shock. Make sure your device is turned off earlier working on it.
Employ oestrus using an iFixit iOpener or another heating gun in social club to weaken the adhesive around the edges of the screen.

Insert the plastic opening tool into the gap between the screen and tablet in the location where you want to start removing the screen.

Insert the plastic opening tool into the gap between the screen and tablet in the location where you want to start removing the screen.
Put an opening pick in the gap created, in between the screen and the panel.
Repeat all around device, putting two picks on meridian and bottom, and ane on each side.

Advisedly remove the small suction loving cup from the corner without moving the screen.
Place the small suction cup in the centre of the screen and elevator to remove screen.
Make sure to separate all mucilage under the middle parts of the screen as well as the edges - use a sparse stiff card to slice through information technology. Avoid the ribbon cablevision. Do non attempt to lift the screen until all glue is separated.
The screen is nonetheless connected to the residual of the device by a cablevision, so don't pull the screen up as well quickly.

Place the plastic opening tool underneath the ribbon cablevision connecting the screen to the tablet.
Carefully lift the plastic opening tool to disassemble the ribbon from the tablet.
Make certain to discharge any static electricity by touching a grounded metal object, like a quarter, before touching the inside of the device.

Remove the xiii 3mm screws from around the edges of the board using a Phillips #i screwdriver caput.
Lift upwardly and remove the panel of the board using a plastic opening tool.